I heard from a few clients and potential clients saying they really didnt care for the small part of the Nano that isnt painted. I decided to explore a wrap solution and it turned out very good IMO. I had an installer do it and he said 3M 2080 wrap is better so i will redo it working directly with him vs going thru the company. 12ft by 12" he said he could do it all in 1 shot with no seams. He recommended going gloss finish as it hides defects better, the pics below is a dull finish. If you go this route use a fine grit sandpaper and knocks down the rough parts. The below pic is the lower quality wrap i only got 5" wide so it has a seam. I am waiting for a price quote from a company the installer recommended, i will add a comment on cost once i get it. Guessing 100 to 150.00 dollars