Exciting news, Fusioncopter is flying out on 2/18 to swap out my engine!!! Below is a list of tools needed for the swap out and most of them will be needed to assemble your nano. We will be doing it near my Dale Hollow vacation home at the Monticello airport EKQ if anyone wants to swing by and see a Nano up close. The *** ones are needed for Nano assembly. The other ones will just be for me and my engine replacement.
***set of allen keys (including 1,5;3;6;8mm)
***set of flat wrenches (including 2x10, 2x13, 12, 11, 8, 7mm)
- flat and cross screwdrivers also precise set
- pliers, cutting pliers,
- set of small files
- set of drills and cordless screwdriver would be helpful
***loctite 243
- CA glue and activator
- do you have a pliers for safety wire?
*** small rattle key with set of socked wrenches will be helpfull
- zip ties in veriable sizes
***torque wrench with spark plugs socket (16mm)
Ahhh, one way rotating clicker. 😉
Gotcha
Thx
1/4 inch is fine
Ratchet/socket set, metric. :)
I've never heard of a "small rattle key",
what is this mysterious aeronautics specialty 'tool'?