Trying out camera siting and editing- a bit amateurish and not tightly edited, but OK for a first pass.
Not sure why the audio wasn't captured.
Drop box link-
https://www.dropbox.com/s/yigqy1rktdvrjaq/11.10.22%20HOME-NZTE.mp4?dl=0
Camera is mounted up in the top right corner just above the master switch.
This was about the best fixed place I could find- perhaps a chest mount may be better?
Need to tilt the camera up more to get a better lookahead.
Pity about my bald head- need to wear a cap!
Further update- Fusioncopter sent me an stl file of a camera mount they use. I 3D printed it and tried it out- works well.
It allows a relatively unobstructed view of the flight controls, EFIS and suroundings.
Perfecto! Thansk Fusioncopter!
I need to firm up the mount- it was only softly clamped in this test- and permanently wire the camera 5V supply inside the side canopy hoop to keep an uncluttered cockpit.
A sample video is here- https://www.youtube.com/watch?v=A60hxbm8QG0